DURAL 340 SL and DURAL 340 NS are two-component, 100% solids, semi-rigid epoxy joint fillers. DURAL 340 SL & NS are available in a Standard Grey color and a Neutral Base, that can be colored with EUCLID UNIVERSAL COLOR PACKS.
EUCO 700 is a two-component, 100% solids semi-rigid epoxy for filling control and construction joints in industrial concrete floors. This product supports the joint edges and reduces spalling of the edges caused by wheel traffic. EUCO 700 has been designed for use in compliance with ACI 302 recommendations for epoxy joint fillers used in control and construction joints. EUCO 700 is available in Standard Gray and a Neutral Base, that can be colored with EUCLID UNIVERSAL COLOR PACKS; available in 33 standard colors.
EUCO QWIKJOINT 200 is a fast-setting, semi-rigid polyurea used for filling control and construction joints in industrial concrete floors. EUCO QWIKjoint 200 represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. Among these benefits are a super-fast set time and an extended shave time: EUCO QWIKjoint 200 can be trimmed flush with the floor immediately after placement or up to 24 hours later. EUCO QWIKjoint 200 supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges.
EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKJOINT UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKJOINT UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. EUCO QWIKJOINT UVR is available in a variety of colours and in a Neutral Base, that can be coloured on site with EUCLID UNIVERSAL COLOR PACKS.
EUCOLASTIC 1NS is a single-component, non-sag, low-modulus, moisture-cure, polyurethane hybrid joint sealant. Eucolastic 1NS is formulated with a unique silane-terminated polyurethane polymer, that provides unequaled performance against stand-alone polyurethane sealants. Eucolastic 1NS is an extremely durable sealant in dynamic joints, offering persistent adhesion once fully cured.
EUCOLASTIC 1SL is a single-component, low-modulus, moisture-cure, self-leveling, polyurethane joint sealant. Eucolastic 1SL is formulated to be extremely durable in dynamic joints. It provides superior wear resistance to rubber tires and pedestrians in high traffic areas.
EUCOLASTIC PRIMER is a single-component, fast drying liquid primer that prepares non-porous surfaces for the application of Eucolastic 1NS and Eucolastic 1SL. EUCOLASTIC PRIMER imparts a surface finish which is very receptive to urethane sealants.
TAMMSFLEX sealants are two-part, elastomeric, polysulfide caulking and sealing compounds. TAMMSFLEX cures at normal temperatures creating a tough elastomeric seal that adheres tenaciously to masonry, metal and wood. TAMMSFLEX will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. TAMMSFLEX has excellent chemical, solvent, and water resistance and will withstand joint movement of up to ±25%.
|DURAL340 SL, DURAL 340 NS||Euclid Chemical Data Sheets|
|EUCO 700||Euclid Chemical Data Sheets|
|EUCO QWIKJOINT 200||Euclid Chemical Data Sheets|
|EUCO QWIKJOINT UVR||Euclid Chemical Data Sheets|
|EUCOLASTIC 1NS||Euclid Chemical Data Sheets|
|EUCOLASTIC 1SL||Euclid Chemical Data Sheets|
|TAMMSFLEX NS/TAMMSFLEX SL||Euclid Chemical Data Sheets|